Search Positions

View Positions By:

Category Location
International Mechanical Superintendent - Dry Various Locations, Overseas

Position Description

B.L. Harbert International is looking for a Mechanical Superintendent with expertise in HVAC systems to work on our project in various locations overseas. Candidate must be able to work with crew of various backgrounds and nationalities. Ideal candidates will have extensive knowledge of electrical methods, practices and procedures. Superintendents will provide direction and guidance to field supervisors and craft employees. Being able to manage work performance and productivity to ensure deadlines are met is a key responsibility in this role. Successful candidates will assist in problem resolution and act as a liaison between senior management, field supervision, craft and TCN employees.

Requirements

Requirements:

  • Candidates must be willing and able to relocate overseas to work on projects up to 30 months
  • Physical requirements include, but are not limited to: standing, stooping, squatting, sitting, climbing, walking. Ability to perform repetitive movements. Ability to work overhead. Ability to use hands to grasp. Ability to reach with arms. Ability to stand, walk, stoop, kneel, squat, crawl, and twist. Ability to sit, climb and balance. Ability to frequently lift and/or push or pull up to 40 pounds and occasionally lift and/or push or pull up to 75 pounds.
  • Ability to work with people from different trades, backgrounds, cultures, etc.
  • Ability to follow and maintain proper building and installation codes
  • General understanding of diagrams and blueprints
  • Minimum 10 years’ experience
  • Following established safety rules and regulations and maintaining a safe and clean environment

Duties and Experience:

  • Minimum of 5 years’ experience in a supervision role
  • Candidate must have HVAC commercial/industrial sheet metal experience
  • Candidate must be able to layout, fabricate, install, and test in accordance with SMACNA (Sheet Metal and Air Conditioning Contractors)
  • Candidate must be familiar with using various HVAC power/hand tools, such as: shears, breaks, punches/forming presses, edging/crimping machines, hammers, drills, etc.
  • Candidate must be able to identify, quantify, order, arrange, and control HVAC materials
  • Candidate must have HVAC equipment installation experience
  • Candidate must have HVAC insulating experience

Close Description

International Mechanical Superintendent - Wet Various Locations , Overseas

Position Description

B.L. Harbert International is looking for a Mechanical Superintendent with expertise in pipe-fitting/plumbing to work on our project in various locations overseas. Candidate must be able to work with crew of various backgrounds and nationalities. Ideal candidates will have extensive knowledge of electrical methods, practices and procedures. Superintendents will provide direction and guidance to field supervisors and craft employees. Being able to manage work performance and productivity to ensure deadlines are met is a key responsibility in this role. Successful candidates will assist in problem resolution and act as a liaison between senior management, field supervision, craft and TCN employees.

Requirements

  • Candidates must be willing and able to relocate overseas to work on projects up to 30 months
  • Physical requirements include, but are not limited to: standing, stooping, squatting, sitting, climbing, walking. Ability to perform repetitive movements. Ability to work overhead. Ability to use hands to grasp. Ability to reach with arms. Ability to stand, walk, stoop, kneel, squat, crawl, and twist. Ability to sit, climb and balance. Ability to frequently lift and/or push or pull up to 40 pounds and occasionally lift and/or push or pull up to 75 pounds.
  • Ability to work with people from different trades, backgrounds, cultures, etc.
  • Ability to follow and maintain proper building and installation codes
  • General understanding of diagrams and blueprints
  • Minimum 10 years’ experience
  • Following established safety rules and regulations and maintaining a safe and clean environment

Duties and Experience:

  • Minimum of 5 years’ experience in a supervision role
  • Candidate must have either Fire Sprinkler, Plumbing, and or Mechanical commercial/industrial piping experience
  • Candidate must be able to layout, fabricate, install, and test piping systems
  • Candidate must be familiar with using various pipefitter power/hand tools, such as: threading/grooving piping machines, welding/brazing/soldering, wrenches, grinders, drills, etc.
  • Candidate must be able to identify, quantify, order, arrange, and control piping materials
  • Candidate must have equipment installation experience
  • Candidate must have piping insulating experience

Close Description

International Mechanical HVAC Tradesman Various Locations, Overseas

Position Description

B.L. Harbert International, LLC, a U.S. General Contractor working in various locations overseas, is seeking candidates for an International Mechanical (HVAC) Tradesman.

Requirements

  • Must be a U.S. Citizen
  • Must be able to obtain and maintain a U.S. Government Security Clearance
  • Candidates must be willing and able to relocate overseas to work on projects up to 30 months
  • Physical requirements include, but are not limited to: standing, stooping, squatting, sitting, climbing, walking. Ability to perform repetitive movements. Ability to work overhead. Ability to use hands to grasp. Ability to reach with arms. Ability to stand, walk, stoop, kneel, squat, crawl, and twist. Ability to sit, climb and balance. Ability to frequently lift and/or push or pull up to 40 pounds and occasionally lift and/or push or pull up to 75 pounds.
  • Ability to work with people from different trades, backgrounds, cultures, etc.
  • Ability to follow and maintain proper building and installation codes
  • General understanding of diagrams and blueprints
  • Minimum 3 years’ experience
  • Following established safety rules and regulations and maintaining a safe and clean environment
  • Candidate must have HVAC commercial/industrial sheet metal experience
  • Candidate must be able to layout, fabricate, install, and test in accordance with SMACNA (Sheet Metal and Air Conditioning Contractors)
  • Candidate must be familiar with using various HVAC power/hand tools, such as: shears, breaks, punches/forming presses, edging/crimping machines, hammers, drills, etc.
  • Candidate must be able to identify, quantify, order, arrange, and control HVAC materials
  • Candidate must have HVAC equipment installation experience
  • Candidate must have HVAC insulating experience

Close Description

International Mechanical Pipefitter Tradesman Various Locations , Overseas

Position Description

B.L. Harbert International, LLC, a U.S. General Contractor working in various locations overseas, is seeking candidates for an International Mechanical (Pipefitter) Tradesman.

Requirements

  • Must be a U.S. Citizen
  • Must be able to obtain and maintain a U.S. Government Security Clearance
  • Candidates must be willing and able to relocate overseas to work on projects up to 30 months
  • Physical requirements include, but are not limited to: standing, stooping, squatting, sitting, climbing, walking. Ability to perform repetitive movements. Ability to work overhead. Ability to use hands to grasp. Ability to reach with arms. Ability to stand, walk, stoop, kneel, squat, crawl, and twist. Ability to sit, climb and balance. Ability to frequently lift and/or push or pull up to 40 pounds and occasionally lift and/or push or pull up to 75 pounds.
  • Ability to work with people from different trades, backgrounds, cultures, etc.
  • Ability to follow and maintain proper building and installation codes
  • General understanding of diagrams and blueprints
  • Minimum 3 years’ experience
  • Following established safety rules and regulations and maintaining a safe and clean environment
  • Candidate must have either Fire Sprinkler, Plumbing, and or Mechanical commercial/industrial piping experience
  • Candidate must be able to layout, fabricate, install, and test piping systems
  • Candidate must be familiar with using various pipe-fitter power/hand tools, such as: threading/grooving piping machines, welding/brazing/soldering, wrenches, grinders, drills, etc.
  • Candidate must be able to identify, quantify, order, arrange, and control piping materials
  • Candidate must have equipment installation experience
  • Candidate must have pipe insulating experience

Close Description