Search Positions

View Positions By:

Category Location
International Electrical Tradesman Various Locations, Overseas

Position Description

B.L. Harbert International is looking for Electrical Tradesmen to work on our projects located in various locations around the world. Candidate must be able to work with crew of various backgrounds and nationalities. Ideal candidates will have extensive knowledge of electrical methods, practices and procedures. Candidates will be required to work closely with Foremen on tasks and duties assigned to complete each project.

Duties:

  • Rough in PVC, EMT, Rigid raceway including bending pipe manually and using hydraulic benders ½” to 6”
  • Rough in of cable and ladder trays
  • Manual pulling power, telecom and control cables/wires.
  • Install/terminate main feeders, branch feeders
  • Trim out electrical devices such as panel-boards, light fixtures (drivers, ballasts, dimming), receptacles, HVAC devices, Fire Alarm, etc.
  • Inspect electrical systems, equipment and components to identify hazards, defects and the need for adjustment or repair and to ensure compliance with codes
  • Ability to assess task/work duration and meet the target dates set

Requirements

  • Ability to obtain and maintain US Government Security Clearance
  • Must be willing to work 6 days/week 10hrs/ day
  • Must be willing and able to travel overseas for extended period of time
  • Follow all safety rules and work in a safe manner. (Knowledge of EM-385 safety guidelines is a plus)
  • Knowledge of the National Electric Code NFPA 72E means and methods.
  • Ability to read blue prints, construction drawings

Close Description

International Mechanical HVAC Tradesman Various Locations, Overseas

Position Description

B.L. Harbert International, LLC, a U.S. General Contractor working in various locations overseas, is seeking candidates for an International Mechanical (HVAC) Tradesman.

Requirements

  • Must be a U.S. Citizen
  • Must be able to obtain and maintain a U.S. Government Security Clearance
  • Candidates must be willing and able to relocate overseas to work on projects up to 30 months
  • Physical requirements include, but are not limited to: standing, stooping, squatting, sitting, climbing, walking. Ability to perform repetitive movements. Ability to work overhead. Ability to use hands to grasp. Ability to reach with arms. Ability to stand, walk, stoop, kneel, squat, crawl, and twist. Ability to sit, climb and balance. Ability to frequently lift and/or push or pull up to 40 pounds and occasionally lift and/or push or pull up to 75 pounds.
  • Ability to work with people from different trades, backgrounds, cultures, etc.
  • Ability to follow and maintain proper building and installation codes
  • General understanding of diagrams and blueprints
  • Minimum 3 years’ experience
  • Following established safety rules and regulations and maintaining a safe and clean environment
  • Candidate must have HVAC commercial/industrial sheet metal experience
  • Candidate must be able to layout, fabricate, install, and test in accordance with SMACNA (Sheet Metal and Air Conditioning Contractors)
  • Candidate must be familiar with using various HVAC power/hand tools, such as: shears, breaks, punches/forming presses, edging/crimping machines, hammers, drills, etc.
  • Candidate must be able to identify, quantify, order, arrange, and control HVAC materials
  • Candidate must have HVAC equipment installation experience
  • Candidate must have HVAC insulating experience

Close Description

International Mechanical Pipefitter Tradesman Various Locations , Overseas

Position Description

B.L. Harbert International, LLC, a U.S. General Contractor working in various locations overseas, is seeking candidates for an International Mechanical (Pipefitter) Tradesman.

Requirements

  • Must be a U.S. Citizen
  • Must be able to obtain and maintain a U.S. Government Security Clearance
  • Candidates must be willing and able to relocate overseas to work on projects up to 30 months
  • Physical requirements include, but are not limited to: standing, stooping, squatting, sitting, climbing, walking. Ability to perform repetitive movements. Ability to work overhead. Ability to use hands to grasp. Ability to reach with arms. Ability to stand, walk, stoop, kneel, squat, crawl, and twist. Ability to sit, climb and balance. Ability to frequently lift and/or push or pull up to 40 pounds and occasionally lift and/or push or pull up to 75 pounds.
  • Ability to work with people from different trades, backgrounds, cultures, etc.
  • Ability to follow and maintain proper building and installation codes
  • General understanding of diagrams and blueprints
  • Minimum 3 years’ experience
  • Following established safety rules and regulations and maintaining a safe and clean environment
  • Candidate must have either Fire Sprinkler, Plumbing, and or Mechanical commercial/industrial piping experience
  • Candidate must be able to layout, fabricate, install, and test piping systems
  • Candidate must be familiar with using various pipe-fitter power/hand tools, such as: threading/grooving piping machines, welding/brazing/soldering, wrenches, grinders, drills, etc.
  • Candidate must be able to identify, quantify, order, arrange, and control piping materials
  • Candidate must have equipment installation experience
  • Candidate must have pipe insulating experience

Close Description

International Tradesman Various Locations, Overseas

Position Description

B.L. Harbert International, LLC, a U.S. General Contractor working in various locations overseas, is seeking candidates for the following International Tradesmen positions:

  • Rough Carpenters
  • Finish Carpenters
  • Electricians
  • Mechanical
    • ​Wet
    • Dry

Requirements

  • Must be a U.S. Citizen
  • Must be able to obtain and maintain a U.S. Government Security Clearance
  • Candidates must be willing and able to relocate overseas to work on projects up to 30 months
  • Physical requirements include, but are not limitied to: standing, stooping, squating, sitting, climbing, walking. Ability to perform repetitive movements. Ability to work overhead. Ability to use hands to grasp. Ability to reach with arms. Ability to stand, walk, stoop, kneel, squat, crawl, and twist. Ability to sit, climb and balance. Ability to frequently lift and/or push or pull up to 40 pounds and occasionally lift and/or push or pull up to 75 pounds.
  • Ability to work with people from different trades, backgrounds, cultures, etc.
  • Ability to follow and maintain proper building and installation codes
  • General understanding of diagrams and blueprints
  • Minimum 3 years’ experience
  • Following established safety rules and regulations and maintaining a safe and clean environment

Close Description